Sand water separator purposes: for the sewage treatment plant will grit chamber cyclone grit chamber sand discharged water mixture were sand-water separation. Sand water separator technical conditions (1) sand-water separator running smoothly, no vibration, shock or abnormal noise. (2) sand-water separator, shaftless spiral has sufficient strength and rigidity to ensure the smooth flow of sand-water separator sand sewage treatment equipment, not entrapment. (3) the drive is in the upper sand-water separator without coupling, with shaftless spiral Direct. (4) sand-water separator set of mechanical, electrical double overload protection device, with automatic limit loads to meet intermittent or continuous operation 24h. (5) sand-water separator U-groove equipped with interchangeable strips. (6) U-sand-water separator tank sealed tight, run no leakage, and easy disassembly and maintenance. (7) sand-water separator shaftless screw axially adjustable gap of not less than 10mm. Spiral sand-water separator features: shaftless spiral sand-water separator, no water bearing, easy maintenance. (2) the use of advanced shaft-mounted reducer, without coupling. (3) strips as interchangeable, easy to replace. (4) spiral axial position is adjustable, easy to adjust the security clearance of the rear end and box walls. Welcome to my company business. Sand-water separator suitable for sewage treatment plant grit chamber, grit chamber will be discharged from the sand-water mixture were sand-water separation. Can also be used for light industry, such as sugar, wine, food processing in the solid-liquid separation. Require filtered water turbidity generally 5 mg / liter or less able to meet drinking water quality standards for industrial use or domestic water treatment equipment to industrial and mining enterprises and towns. Industrial effluent suspended solids removal, etc. have a good effect. Flocculating suspended solids in water containing the sheet by precipitation methods can not remove the bond colloidal particles, water may be through the filter layer packed in the pressure filter, so that the water reaches transparent. Sand-water separator principle by shaftless spiral, lining, U-groove box, spoiler, weir and drives composed of sand-water separator. Sand-water mixture of sand-water separator tank input from one end of the top of the separator where to buy, a mixture of large and severe, such as sand, etc. will be deposited at the bottom of the trough-made sand-water separator in a spiral, driven sand along Inclined U-bottom upgrade, after leaving the surface continues goes some distance in the sand dehydrated fully discharged through the discharge port to hold sand sand bucket with sand and water separated from the overflow discharge port and sent to factory inside into the pool. Sand-water separator manufacturers, Guigang sand-water separator, rich students provided by the Guangzhou Environmental Protection Engineering Co., rich students. Environmental Protection Engineering Co., Ltd. Guangzhou Fu students (www.fushengyuan.com) strong, credible, in Guangzhou environmental monitoring equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the rich into the brilliant students and you work for a better future!