Spiral sand-water separator sand-water separator works by shaftless spiral strips, U-bad, tanks, spoiler, weir and drives and other components. Sand-water mixture from the top of the separator tank input end, a mixture of large and severe dry sand, etc. will be deposited at the bottom of the trough, driven in a spiral. Sand along the U-shaped bottom oblique upgrade, after leaving the surface continues goes some distance in the sand dehydrated fully discharged through the discharge port to hold sand sand bucket. The water and sand separated from the overflow port and sent to the factory sent into the pool. In addition, the sand-water-sand-water separator can also be set at the inlet of a cylindrical cyclone pre-separator, sewage along the tangential direction of the cylinder into the vortex sink into the sand so that the spiral separator, the flooding back grit chamber or cell gate well, play pre-grit and regulation of water spiral sand-water separator separation. This product is the introduction of the product in the digestion of sand-water separator, according to the introduction of products for use in the domestic situation sand-water separator spot, improved design, solved some foreign products to replace the inconvenience and spiral strips axial position of the defect is not adjustable. Sand water separator purposes: for the sewage treatment plant will grit chamber cyclone grit chamber sand discharged water mixture were sand-water separation. Sand water separator technical conditions (1) sand-water separator running smoothly, no vibration, shock or abnormal noise. (2) sand-water separator, shaftless spiral has sufficient strength and rigidity to ensure the smooth flow of sand, not entrapment. (3) the drive is in the upper sand-water separator, sand-water separator without coupling sewage treatment, and shaftless spiral Direct. (4) sand-water separator set of mechanical, electrical double overload protection device, with automatic limit loads to meet intermittent or continuous operation 24h. (5) sand-water separator U-groove equipped with interchangeable strips. (6) U-sand-water separator tank sealed tight, run no leakage, and easy disassembly and maintenance. (7) sand-water separator shaftless screw axially adjustable gap of not less than 10mm. Spiral sand-water separator features: shaftless spiral, no water bearing, easy maintenance. (2) the use of advanced shaft-mounted reducer, without coupling. (3) strips as interchangeable, easy to replace. (4) spiral axial position is adjustable, easy to adjust the security clearance of the rear end and box walls. Welcome to my company business. Custom sand-water separator _ _ Zhongshan sand-water separator provided rich students from Guangzhou Environmental Protection Engineering Co., rich students. Environmental Protection Engineering Co., Ltd. Guangzhou Fu students (www.fushengyuan.com) strong, credible, in Guangzhou environmental monitoring equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the rich into the brilliant students and you work for a better future!