Spiral sand-water separator sand-water separator works by shaftless spiral strips, U-bad, tanks, spoiler, weir and drives and other components. Sand-water mixture from the top of the separator tank input end, a mixture of large and severe dry sand, etc. will be deposited at the bottom of the trough, driven in a spiral. Sand along the U-shaped bottom oblique upgrade, after leaving the surface continues goes some distance in the sand dehydrated fully discharged through the discharge port to hold sand sand bucket. The water and sand separated from the overflow port and sent to the factory sent into the pool. In addition, the sand-water-sand-water separator can also be set at the inlet of a cylindrical cyclone pre-separator, sewage along the tangential direction of the cylinder into the vortex sink into the sand so that the spiral separator, the flooding back grit chamber or cell gate well, play pre-grit and regulation of water spiral sand-water separator separation. This product is the introduction of the product in the digestion of sand-water separator offer, according to the introduction of products in the domestic use of sand-water separator selection, design improvements, solve some foreign products to replace the inconvenience and spiral strips axial position is not adjustable defects . Sand-water separator suitable for sewage treatment plant grit chamber sand water separator, the grit chamber sand discharged water mixture were sand-water separation. Can also be used for light industry, such as sugar, wine, food processing in the solid-liquid separation. Require filtered water turbidity generally 5 mg / liter or less able to meet drinking water quality standards for industrial use or domestic water treatment equipment to industrial and mining enterprises and towns. Industrial effluent suspended solids removal, etc. have a good effect. Flocculating suspended solids in water containing the sheet by precipitation methods can not remove the bond colloidal particles, water may be through the filter layer packed in the pressure filter, so that the water reaches transparent. Sand-water separator principle by shaftless spiral, lining, U-groove box, spoiler, weir and drives composed of sand-water separator. Sand-water mixture of sand-water separator tank input power from the top end of the separator, a mixture of large and severe, such as sand, etc. will be deposited at the bottom of the trough, in the spiral, driven sand along the inclined U-bottom upgrade After leaving the surface continues goes some distance in the sand dehydrated fully discharged through the discharge port to hold sand sand pail, sand and water separated from the overflow discharge port and sent to the factory into the pool. Rich students (Figure), sand-water separator selection, Chongzuo sand-water separator is provided by Environmental Protection Engineering Co., Ltd. Guangzhou Fu students. Environmental Protection Engineering Co., Ltd. Guangzhou Fu students (www.fsyhb.com) adhere to the "people-oriented" business philosophy, has a professional staff, and strive to provide the best products and services to contribute to the community, and to welcome new and old customers to visit us, sincere cooperation for a better future. Rich students - your trusted friend, Company Address: No. 908 Tianhe North Road, Block B Tech big summer Tianhe District, Guangzhou City, No. 2805-2806, Contact: Hu big reed.