1. Prepare device management and operations staff before running sand-water separator must learn more about the composition and performance of the equipment, carefully read the information on each device, such as the use of manual. 2. Check the overflow outlet valves are open. 3. Check whether splitter cabinets catching spiral debris, if any should be cleaned. 4. Run the winter, you should always check whether there is ice cabinets, remove, if necessary, in order to avoid excessive twisting the screw shaft damage. Check the gearbox oil meets the requirements, if any leakage or loss, at any time up the oil to the oil level . 6. Check the duty record the scene to check for faults recorded or displayed. 7. If the sand-water separator over 24 hours of work in a batch sand-water separator selection, the operator must observe the presence of the work is resumed. Spiral sand-water separator Introduction spiral sand-water separator suitable for sewage treatment plant (station) of the grit chamber sand water separator, a device for treating sewage treatment sand-water mixture. The grit chamber sand discharged water mixture were sand-water separation. Its features are as follows: 1, the separation efficiency of up to 96-98%, separable particle ≥0.2mm particles. 2, shaftless spiral sand-water separator offer, no water bearing, easy maintenance. 3, compact and light weight. 4, the new gear, key components - reducer for advanced shaft-mounted, without coupling, conveniently installed on. Sand-water separator Selection | Luzhou sand-water separator | rich students provided by the Guangzhou Environmental Protection Engineering Co., rich students. Environmental Protection Engineering Co., Ltd. Guangzhou Fu students (www.fsyhb.com) strong, credible, in Guangzhou environmental monitoring equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the rich into the brilliant students and you work for a better future!